SV1 – Sample valve
Sample valve for the CCT-M fermentation tanks
The sample valve (sample cock) for tasting samples of produced beverage directly from the fermentation tank during the beverage production process. It is connected to the SV port of the basic tank (TriClamp connection)
Offer for the SV1 sample valves :
- HBA-SSP-01 : Sampling spiral (compatible with the TEA-STN-DN10 sampling valve)
The sampling spiral for reducing of foam during the tasting of beer with the sampling valve. It is designed for use with simplified stainless steel pressure fermenting / maturating tanks and the sampling cock type 2. Pipe connection : G 3/8" Female thread. Read more » - HBA-SCK-01: Sampling cock type 1, NW10 inner thread / Stainless steelThe sampling cock NW10 type 1 for tasting of beer, cider, wine for use with simplified stainless steel pressure fermenting / maturating tanks. Read more »
- TEA-STN-DN10 : Sampling tap, NW 10 inner thread / stainless steel AISI 3Sampling cap with cap nut DN10 (also NW10 DIN 11851). Flame resistant. With connection thread for connecting of knuckle spiral . For use with pressure tanks. Order number 83922. Read more »
- HBA-SCK-21 : Sampling cock type 2, NW20 inner thread / Stainless steelThe sampling cock NW20 type 1 for tasting of beer, cider, wine for use with simplified stainless steel pressure fermenting / maturating tanks. Read more »
- MTS-SV1-DN8TC : Sampling valve DN8 / TriClamp 34mm / stainless steel AISI 304MTS-SV1-DN8TC Sampling valve sanitizable DN8 TC is an extension equipment to the product sample taking during the fermantation-maturation process in the tank. Connection : Side connection (to tank SV port TriClamp) DIN 32676 “Tri Clamp” ⌀34 mm DN 8 / NW 8. The sampling valve is equipped with the hole for easy sanitizing . Read more »
- NTC-SCL-10 : Anti-foam sampling spiral for tanks – the foam remover / AISI 304The anti-foam spiral is designed to be compatible with the sampling valve for the Nano-tanks. It serves to remove foam from beer when is sampling under pressure from the tank. Designed as accessory for the Nano cylindroconical tanks. Read more »
- NTC-SVK-10 : Sample valve for tanks TriClamp DN25 50.5mm 1.5″ / Stainless steelSample valve with connection TriClamp 1,5" (Disc with diameter of 50.5 mm). Designed as accessory for the Nano cylindroconical tanks. Read more »
- TF-SV1TC2034 : Sampling valve DN20 / TriClamp 34mm / stainless steel AISI 304Sampling valve with connection of TriClamp DN20 (Disc with diameter of 34 mm). Designed as accessory for the beverage production-storage tanks. Read more »
- TF-SV1TC2550 : Sampling valve DN25 / TriClamp 50.5mm / stainless steel AISI 304Sampling valve with connection of TriClamp DN25 (Disc with diameter of 50.5 mm). Designed as accessory for the beverage production-storage tanks. Read more »
- TF-SV1PTSC : “Pigtail” Anti-foam Sampling Coil for Sample Valve / stainless steel AISI 304The "Pigtail" Sampling Coil is designed to be compatible with the TF-SV1TC2034 and TF-SV1TC2550 sampling valves for the stainless steel tanks. It serves to remove foam from beer when is sampling under pressure from the beer tank. Read more »
WordPress RSS Feed Retriever by Theme Mason
Scheme of the CCT-M modular system with locations of the optional MTA armatures
MTA armatures are optional accessories for equipping of the basic tanks of the CCT-M system. The required configuration of the modular tanks is reached by equipping the basic tank with appropriate combination of MTA armatures.
- MTA armatures – optional accessories for the basic tanks of the CCT-M system
- BT basic tanks – pressure cylindrically-conical fermentors without armatures – main parts of the CCT-M system
- CCT-M modular system – general informations about the modular cylindrically-conical fermentors
