Plate beer filters

Plate beer filters

– light primary filtration of beer for aspiring microbreweries

Plate beer filter for microbreweries BREWORXBeer filtration

The beer filtration through a plate filter is the cheapest and easiest way to get rid of most beer live yeast . It is used in a microbrewery of a small and medium size, for which the cost is a primary decision parameter.

Plate filters for beer are made from stainless steel and plastic, therefore resist to a certain extent aggressive substances. They consist of two end steel plates ,one of which is slidable on guide pins , controlled by the pressure screw or hydraulic element. Among them there are filtering stainless steel or polypropylene frames with filter cellulose pads (plates ) of the set size and number according to the required purity , flow and overall capacity of the filtered liquid .

During passage of beer through the insert the contained impurities are captured and they decrease gradually flow rate of the inserts at a constant clean filtrate.

Plate filter is mobile on castors and wheelsand is equipped with a control pressure gauges, air-outlet valve and flow taps, chrome brass or stainless steel. The filter allows continuous filtering, i.e., that it can perform dual filtering with different purity grade using two types of inserts in one pass through the filter body . It is a convenient way especially in terms of lower workload of handling liquid and easier to work.

Advantages of a plate filtration:

  • Low cost of ownership
  • Easy to use
  • Using both primary and secondary filtration – choice of filter elements

Disadvantages of a plate filtration:

  • Higher cost of consumables – filter cartridges
  • Necessary to remove the filter for cleaning and replacing the filter elements

 

We offer these plate filters :

  • PLF-IPE4040 : Plate filter 400×400 with polyethylene platesPLF-IPE4040 : Plate filter 400×400 with polyethylene plates
    Plate filter 400×400 with polyethylene plates. Available with 20, 30, 40, 50, 60 or 80 pcs of PE plates (frames) for filtration cartons 400×400 mm. This filtration system involves the use of filter layers “cartons” which are interposed between the plates with frames made of polyethylene. It can be used for a primary and secondary filtration of beer, wine or cider before the bottling process. Sterilization with hot steam is not allowed. With a set for the double filtration – the double filtration kit. Can be delivered with SST filter plate holders for double filtration (optionaly). Read more »
  • PLF-SSP4040 : Plate filter 400×400 mm with stainless steel plates and a pumpPLF-SSP4040 : Plate filter 400×400 mm with stainless steel plates and a pump
    Plate filter 400x400 with stainless steel plates and a pump. Available with 11, 19, 29 or 39 pcs of stainless steel plates (frames) for filtration cartons 400x400 mm. This filtration system involves the use of filter layers "cartons" which are interposed between the plates with frames made of stainless steel. It can be used for a primary and secondary filtration of beer, wine or cider before the bottling process. Sterilizable with hot steam. With a set for the double filtration - the double filtration kit. Can be delivered with SST filter plate holders for double filtration (optionaly). Read more »
  • PLF-SPP2020 : Portable stainless steel plate filter 200×200 with polyethylene plates and a the pumpPLF-SPP2020 : Portable stainless steel plate filter 200×200 with polyethylene plates and a the pump
    Portable stainless steel plate filter 200x200 with polyethylene plates and an electrical pump. Available with 6, 12 or 18 pcs of polyethylene plates (polyethylene frames) for filtration cartons 200x200 mm. This filtration system involves the use of filter layers "cartons" which are interposed between the plates with frames made of polyethylene. New and very favourably priced handy table top model of the beverage filter with handle and drip tray. Pump without bypass, can also be used separately. Suitable for filtering food liquids such as wine, beer, juice, etc. Not suitable for double filtration. With standard NBR seal for liquids up… Read more »
  • PLF-SSP2020 Mobile plate filter 200×200 with stainless steel plates and a pumpPLF-SSP2020 Mobile plate filter 200×200 with stainless steel plates and a pump
    Semi-professional plate filter for the filtering of wine, beer, fruit juices, etc. With powerful stainless steel centrifugal pressure pump, mobile frame in stainless steel, filter holders in moplen and the necessary connection parts (for 19 mm PVC hoses). The pump can also be used separately for siphoning.. Available with 10, 20 or 30 pcs of stainless steel plates (frames) for filtration cartons 200x200 mm. This filtration system involves the use of filter layers "cartons" which are interposed between the plates with frames made of stainless steel. New and very favourably priced handy table top model of the beverage filter with… Read more »
WordPress RSS Feed Retriever by Theme Mason
keyboard_arrow_up